HARLEY-DAVIDSON LARGE LED SILVER BULLETS INSTALLATION INSTRUCTIONS
download PROCEDURE STEP 1*Remove the stock turn signal fixtures and cut the wires in a convenient and inconspicuous splice location. STEP 2**Place the split lock and flat washers on to the hollow bolts...
View ArticleSR-C400 Motorcycle Security System INSTALLATION MANUAL AND USER'S GUIDE
download Routing the Antenna Wire The MCM includes an 18″ antenna wire. The first 12″ is a coaxial wire; the remaining 6″ is the reception antenna wire. When routing, try to avoid running the antenna...
View Article2002-2005 Honda VFR800/A Wire Harness Replacement Manual
download If the 18P (light blue) connector is in abnormal condition as shown below, contact TechLine at (800) 421-1900, option 9. FRONT SUB-HARNESS REPLACEMENT 1. Remove the front sub-harness from the...
View ArticleTOYOTA COROLLA 1984-2006 VEHICLE WIRING VEHICLE WIRING REMOVAL
download IRING INFORMATION: 1984 Toyota Corolla FWD WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE WHITE OR WHITE/RED Ignition Harness STARTER WIRE BLACK/WHITE Ignition Harness IGNITION WIRE...
View ArticleHARLEY DAVIDSON VRSC BRACKET FOR BILLET HEADLAMP SHELL REMOVAL AND...
download REMOVAL VRSCA Models 1. Remove windshield (if equipped). Refer to appropriate Instruction Sheet for procedures. 2. Remove right side cover and maxi-fuse. Refer to MAXI- FUSE in Service Manual....
View ArticleLED SHOW LIGHTING INSTALLATION INSTRUCTIOINS
download 1. The kit is supplied with 4 “cluster” lights that project a round flood lighting pattern and 4 “array” lights that have a narrow fan type pattern. Determine where you would like to mount the...
View ArticleVictory Kingpin Rear LED Turn Signal Kit Installation Manual
download Step 1 •Remove rider’s seat, strut covers, and passenger seat (if applicable) •Separate wiring harness connector for rear lights •Remove screws from each side of fender and plastic connectors...
View ArticleHARLEY DAVIDSON WIRE LOOM AND HORNS INSTALLATION INSTRUCTIONS
download Remove the stock horn and bracket from the stud it is mounted to and unplug the 2 wires. Remove the seat. Route the end of the wire and hose loom without the connectors. Starting in front of...
View ArticleHARLEY DAVIDSON DETACHABLE QUARTER FAIRING AND DOCKING HARDWARE KIT...
download Installation The rider’s safety depends upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not...
View Article1982-2005 Harley Motorcycle Removal and Installation Instructions
download ” bolt from the mounting stem on the Signal® mirror. While seated on the motorcycle, position the Signal® mirror on the handle bar. Secure the Signal® mirror to the handle bar using the 5/ 16...
View Article
More Pages to Explore .....